The combined filter cartridge dust collector has the advantages of small volume, high efficiency, low investment and easy maintenance. However, due to its small equipment capacity, it is difficult to combine into large air volume equipment, low filtration wind speed and narrow application range. It is only applied in grain, welding and other industries, so it has not been widely popularized for many years.
Filter cartridge dust removal equipment jutian environmental protection
Purification principle of combined filter cartridge dust collector:
The dusty air flow enters the dust collector from the side inlet or top inlet. The dust is "intercepted" and gathered by the surface of the filter cartridge. The purified air flow flows out and discharges from the center of the filter cartridge to achieve the purpose of purification. In order to clean the filter cartridge, compressed air (0.6-0.7mpa) is used to generate strong air flow, which is released to the center of the filter cartridge through the solenoid valve, and the dust gathered on the outer surface of the filter cartridge is oscillated and blown down like a vibration wave and falls into the ash hopper below. In order to ensure the normal and continuous operation of the filter cartridge dust removal, the back blowing is carried out by the PLC control system according to the set procedure.
Combined filter cartridge dedusting jutian environmental protection
Characteristics of combined filter cartridge dust collector:
1. The equipment has small volume and small floor area, which saves the use space;
2. High purification efficiency of equipment; It has a purification efficiency of more than 99 for dust with particle size of more than submicron;
3. The imported American filter cartridge is used as the main component of purification, and the filter cartridge has a long service life;
4. The equipment has reasonable structure, simple maintenance and low cost; It is convenient and fast to replace the filter cartridge without any tools;
5. The equipment is energy-saving, the operating resistance is 500-800pa, the initial resistance is less than 200Pa, * the high resistance is 1500pa;
6. It adopts imported PLC to control adjustable pulse back blowing, and is equipped with external inlet differential pressure display instrument;
7. The filter cartridge is placed horizontally in series, and a single cover ensures the safe operation and convenient maintenance of the equipment;
8. The ash discharging mode of ash bucket, ash discharging vehicle, screw discharging device, etc. can be selected;
9. The flexible box type combined unit module can meet different field installation conditions;
10. A variety of filter cartridge materials are available for users to choose, including high temperature resistant, moisture-proof, flame-retardant and so on.